دستگاه فیوژن فیبر نوری فوجیکورا 62S

نقد و بررسی دستگاه فیوژن فیبر نوری فوجیکورا 62S

Fusion Splicer Fujikura 62S

فیوژن فیبر نوری دستگاهی در تجهیزات شبکه است که می تواند کور ها یا همان هسته اصلی که جنس آن از نوعی شیشه مخصوص تشکیل شده است را به هم جوش دهد. دستگاه فیوژن فیبر نوری پس از گردش کور ها و سر به سر کردن آنها به مقدار زاویه برش, شرایط جوش دادن آن ها را فراهم می آورد.

مشخصات فنی دستگاه فیوژن فیبر نوری فوجیکورا 62S :

• Type : Fusion Splicer Fujikura
• Applicable Fibers : Single-mode (G.652 and G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
• Cladding Diameter : 80 μm to 150 μm
• Coating Diameter : 100 μm to 1,000 μm
• Fiber Cleave Length : 5 to 16 mm
• Typical Average Splice Loss : 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards
• Splicing Time : ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber
• Arc Calibration Method : Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
• Splicing Modes : 100 preset and user programmable modes
• Splice Loss Estimate : Based upon dual camera core axis alignment data
• Storage of Splice Result : Last 10,000 results stored in the internal memory
• Fiber Display : X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
• Magnification : 320X for single X or Y view, or 200X for X and Y view
• Viewing Method : Dual cameras with 4.7 inch TFT color LCD monitor
• Operating Condition : 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
• Mechanical Proof Test : 1.96 to 2.25N
• Tube Heater : Built-in tube heater with 30 heating modes; auto-start function
• Tube Heating Time : Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves
• Protection Sleeve Length : 60 mm, 40 mm, micro
• Splice/Heat Cycles with Battery : Typical 200 cycles with power save functions activated
• Electrode Life : 5,000 Arc Discharges
• Power Supply : Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8  V DC with BTR-09 battery
• Terminals : USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03
• Wind Protection : Maximum wind velocity of 15 m/s (34 mph)
• Dimensions : 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)
• Weight : 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery