Line Terminal:- PWR, LNK, TST, ALM, E1, LAN TX, RX, LNK/SPD
Power Requirement:- AC/DC, DC/DC external power adapter (12V, 1A)
- Power consumption: 6.8W
Optical Interface:- Connector type: SFP-LC
- One port for 1000Base-X SFP modules
- Support SFP DDM: Temperature, Voltage, Current, Tx Power, Rx Power
- For detailed wavelength and distance of SFP modules, please
refer to SFP Transceivers datasheet
Electrical Interface:- Connector type: Shield RJ-45 jack
- Two ports for 10Base-T/100Base-Tx/1000-BaseT
- Auto-MDI/MDIX detection
- Auto-negotiation for speed and duplex
- Full duplex / Half duplex support
- Support Ethernet cable diagnostics feature
- Complies with IEEE 802.1q Tag VLAN (including Q-in-Q)*
- Bandwidth control and support 9K Jumbo frame
- 802.1P priority queue control
- Dying Gasp
- IGMP Snooping
- 802.1D Spanning Tree
TDM E1 Interface:
- Connector type: 4 standard G.703 E1 interfaces (RJ-48)
- Line impedance : 75 ohms or 120 ohms +/- 5 % resistive
- Line Code: HDB3
- Line rate: 2.048Mbps 50ppm
- G.704 Framing with CRC or Unframe mode support.
- Jitter performance: compliant with ITU-T G.823
- DS0 Bypass On/Off