لاین ترمینال تاینت Muxpro 8216

System:

- Using GFP (ITU-T G.7041) or LAPS (ITU-T X.85/86) encapsulation transport Ethernet over SDH
- Link Capacity Adjustment Scheme (LCAS) compliance with ITU-T G.7042 for seamless bandwidth control
- Support VC-3/VC-12 cross connect mapping
- High order payload with virtual concatenation - mapping the Ethernet traffic over up to 1 x VC-4 links
- Low order payload with virtual concatenation - mapping the Ethernet traffic over up to 63 x VC-12/3 x VC-3
- GFP Mux, groom multiple Ethernet ports traffic into different bundles of Virtual Containers, (up to 6 bundles)
- Ethernet Line-Service (Point to Point) and Ethernet LAN-Service (Multipoint to Multipoint)
- System clock synchronization from primary internal clock and secondary clock from STM-1 or tributary (820/8216 only)
- Configurable through user friendly Web-Interface
- Manage remote units via dedicated VC-12 channel or DCC channel
- Selectable DCC channels: D1~D3, D4~D12, D1~D12
Ethernet :
MUXpro 820/8216/822F support L2 switch function for LAN1~LAN4, transparent bridge function for LAN5~LAN6; MUXpro 822G supports 1GE
interface with L2 switch function
Spanning Tree Protocol (STP IEEE 802.1D, MUXpro 820/8216/822F only), and status monitor
QoS (VLAN or DSCP selection) via four priority queues, supporting IEEE 802.1P, IPv4 TOS/DiffServ
Provide port-based VLAN, 802.1Q VLAN tagging up to 64 VLAN IDs

Dimensions Line Terminal: 210 x 285 x 41mm
Transmission Mode:
- MUXpro 8216:  8/16 E1 + 6 Fast Ethernet
STM-1 Interface:
- Number of ports: 2, 1+1 MSP protection available
- Bit Rate: 155 Mbps
- Jitter Performance: compliant with ITU-T G.783
- Optical Wavelength: 1310nm
- Optical output power: -6dBm
- Receiver sensitivity: -32dBm
- Connectors: SC or FC/PC
Ethernet Interface:
- FE interfaces: 6 (4 VLAN ports and 2 Transparent LAN ports)
- Ethernet Type: 10/100 BaseT
- Compliance: IEEE802.3u, 802.3x
- Connectors: RJ45, Shielded
- GE Interface:
Number of port : 1
 Ethernet Type : 10/100/1000 BaseT
 Compliance : IEEE802.3ab
Connectors : RJ45 , Shielded
- GE Interface (SFP, optional)
Number of port : 1
Ethernet Type : 1000 BaseX
Compliance : IEEE802.3z
Connectors : LC
- Ethernet packet length:
1536 bytes for FE 4 VLAN ports
9600 bytes for FE 2 Transparent LAN ports
1632 bytes for GE LAN port
E1 Interface (820/8216 only):
- Number of ports: 8
- Line Rate: 2.048 Mbps
- Line Coding: HDB3
- Jitter Performance: compliant with ITU-T G.823
- Connector: SCSI II, female
- Support local cross connect for all tributary E1
Diagnostic Function:
- Local loopback from SDH
- Remote loopback from SDH
- E1 side local and remote loopback (820/8216 only)
Management:
- Easy to use Web UI configuration management SNMP v2 with Tainet UNMS
- Provide 5 SNMP trap IP and read/write/trap community setting
- Support configuration upload/download and Fireware upgrade throuth TFTP