شاسی مودم تاینت IEAC-16

Dimension Modem:

- Line cards: 84(W) x 172(D) x 24(H) mm
- iEAC-16: 480(W) x 366(D) x 89(H) mm
System Feature:
- 2U high, 19” chassis with 16 slots for line cards
- Real Time Clock and Reset button
- Power and Fan alarm LED indicators
- Dual Hot-Swappable AC/DC power for load sharing and
redundancy
- Green Fan facility, turns ON and OFF with internal temperature
- Auto detection on available line cards and chassis
- All plug- in cards are hot swappable
System cards:
- iEAC-16: Intelligent Ethernet Access Chassis
- MCU-16: Controller of iEAC-16 with NMS/WEB agent
- iEAC-AC: AC Power Module
- iEAC-DC: DC Power Module
- iEAC-FAN: FAN Module
Line cards:
- FNTU 761C, 761CU: Optical Fiber MUX, Gigabit Media Converter with 4 Balanced/ Unbalanced E1
- ENTU 763C/GO: 1000Base-X SFP to 1000Base-X SFP OEO 3R Repeater
- ENTU 763C/GE: 1000Base-X SFP to 10/100/1000Base-TX Ethernet
- SNTU 764C/2W, 764C/4W, 764C/8W: G.shdsl.bis 2/4/8-wire RJ-45 to 10/100Base-TX Ethernet
- SNTU 765C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX Ethernet and E1 interface
- VNTU 766C:  VDSL2 RJ-11 to 10/100Base-TX Ethernet (RJ-45)
- VNTU 766CX: VDSL2 BNC to 10/100Base-TX Ethernet (RJ-45)
Management & OAM Functions:
- Management with user privilege: Web GUI,CLI: Telnet, RS-232 craft port
- Management IP can be set as static or dynamic IP
- Supports VLAN for 802.1Q tagging/un-tagging
- System logs and SNTP time synchronize to RTC
- Built-in non volatile memory to store line cards, remote units, PM data and chassis configurations
- DSL / Optical Link status on web management
- SNMP alarm trap
- Alarm LED indicator monitoring
- Firmware upgradable for system and Line cards
LED Indicators:
- MCU-16: MAJ/MIN ALM, FAN, FAN ON, PWR1, PWR2, ETH LNK/SPD
- FNTU 761C: PWR, LNK, TST, ALM, E1, LAN Tx/Rx, LNK/SPD
- ENTU 763C: PWR, CO, LNK, TST, RF, TP, LAN LNK/SPD
- SNTU 764C: PWR, CO, ALM, TST, L1~L4, ETH LNK/SPD
- SNTU 765C: ALM, TST, DSL1~2, E1, ETH LNK/SPD
- VNTU 766C: PWR, CO, LNK, TST, LAN LNK/SPD
Power Requirement:
- Hot Swappable Redundant Power Modules
- iEAC-AC: AC Power Input: 100 ~ 240V, 50/60Hz (160W)
- iEAC-DC: DC Power Input: -36 ~ -72V (160W)